Provide the essential do design a pwps, wps according to ASME IX: Qualification Standard For Welding And Brazing Procedures, Welders, Brazers, And Welding And Brazing Operators ?
Asked 3 mois, 3 semaines ago | Viewed 149times
   Ask Question
0

Designing a PWP and WPS according to ASME IX: A Detailed Question

Context:

You are a welding engineer tasked with designing a Procedure Qualification Record (PQR) and Welding Procedure Specification (WPS) for a critical structural component in a power plant. The component is made of ASTM A533 Grade B Class 1 steel and will be welded using the Gas Metal Arc Welding (GMAW) process with ER70S-6 wire and a CO2 shielding gas. The weld joint will be a single V-groove butt joint with a root opening of 1/8".

The Question:

Based on the provided information, how would you design a PQR and WPS for this weld, ensuring compliance with ASME IX?

Specifically, address the following in your response:

  1. PQR Design:
    • Essential variables to be included in the PQR based on ASME IX requirements for the chosen welding process, base metal, filler metal, and weld joint design.
    • Non-essential variables that can be varied within the WPS without requiring further PQR qualification.
    • Testing requirements for the PQR based on ASME IX, including mechanical testing, macro-examination, and radiographic testing.
    • Acceptance criteria for each test based on ASME IX.
  2. WPS Design:
    • Essential variables to be included in the WPS, aligning with the PQR.
    • Non-essential variables that can be adjusted within the WPS based on site conditions.
    • Detailed weld procedure outlining specific welding parameters like travel speed, voltage, wire feed rate, and gas flow rate.
    • Inspection and quality control requirements for the WPS, including visual inspection and dimensional verification.
  3. Additional Considerations:
    • Pre-heating and interpass temperature control: How would you determine the necessary pre-heat and interpass temperatures based on ASME IX and the material specifications?
    • Heat treatment: Would heat treatment be required for this weld based on ASME IX and the specific application? Explain your reasoning.
    • Impact testing: Would impact testing be required for this specific application based on ASME IX? Justify your decision.

Note: Provide detailed explanations for each aspect of the PQR, WPS, and additional considerations, referring to specific sections and paragraphs in ASME IX where applicable.

 specific  terms  facilities_1
demandé 28 juillet 2024 13:05
19
alibat27
0 0 gold badges 0 silver badges 0 bronze badges
comment question
1 Answer(s)
0

Designing a PWP and WPS according to ASME IX

Designing a PWP (Procedure Qualification Record) and WPS (Welding Procedure Specification) according to ASME IX requires a systematic approach and meticulous attention to detail. Here's a breakdown of the essential steps involved:

1. Define the Welding Application:

  • Material: Specify the base metals, filler metals, and their respective grades and specifications.
  • Joint Type: Identify the specific joint configuration (e.g., butt joint, fillet weld, corner joint).
  • Position: Define the welding position (e.g., flat, horizontal, vertical, overhead).
  • Thickness: Specify the thickness of the base material.
  • Design Requirements: Outline any specific strength, fatigue, or other design considerations.

2. Determine the Welding Process:

  • Choose the Welding Process: Select the appropriate welding process based on material, joint type, and desired characteristics. Common processes include:
    • Shielded Metal Arc Welding (SMAW)
    • Gas Metal Arc Welding (GMAW)
    • Gas Tungsten Arc Welding (GTAW)
    • Submerged Arc Welding (SAW)
    • Flux Cored Arc Welding (FCAW)
  • Select the Filler Metal: Choose a filler metal that is compatible with the base material and welding process, ensuring appropriate strength, ductility, and corrosion resistance.

3. Define Welding Parameters:

  • Current: Specify the current range for the chosen welding process.
  • Voltage: Define the voltage range for the chosen welding process.
  • Travel Speed: Determine the appropriate travel speed based on the material, thickness, and process.
  • Interpass Temperature: Set the interpass temperature for multi-pass welds to prevent cracking and ensure proper fusion.
  • Preheating and Post-heating: Specify any required preheating or post-heating temperatures and procedures.

4. Establish Quality Control:

  • Inspection Method: Define the inspection methods to be used (e.g., visual inspection, radiographic inspection, ultrasonic inspection).
  • Acceptance Criteria: Establish clear acceptance criteria for the welds based on the ASME IX requirements and specific application needs.
  • Documentation: Establish a system for documenting welding procedures, qualifications, and inspection results.

5. Develop the PWP:

  • Qualification Tests: Perform qualification tests on the specific welding procedure, using test coupons that represent the actual welding application.
  • Mechanical Testing: Conduct mechanical tests on the qualified test coupons, including tensile strength, yield strength, ductility, and impact testing, as per ASME IX requirements.
  • Documentation: Record the results of the qualification tests and mechanical testing in the PWP.

6. Develop the WPS:

  • Detailed Instructions: Compile a comprehensive document that outlines the specific welding procedure in detail. This includes:
    • Welding Process and Equipment
    • Filler Metal
    • Welding Parameters
    • Joint Preparation
    • Preheating and Post-heating
    • Inspection and Acceptance Criteria
  • Quality Control: Include a section on quality control measures to be implemented during production welding.

Formula for Calculating the Required WPS Qualification Number (QW Number):

The QW number is determined by the type of weld, the thickness of the material, and the welding process used. It is a unique identifier for each WPS and is used to track the qualification of the procedure.

QW Number = [Weld Type] + [Thickness] + [Welding Process]

Example:

  • Weld Type: Butt joint
  • Thickness: 1/2 inch
  • Welding Process: GMAW

QW Number: BW-1/2-GMAW

Note: The specific formulas and requirements for calculating the QW number may vary depending on the specific ASME IX code section and the year of publication.

Important Considerations:

  • ASME IX updates: Regularly review and update your PWP and WPS documents to comply with the latest revisions of ASME IX.
  • Material compatibility: Ensure the materials selected for the welding procedure are compatible and meet the ASME IX requirements.
  • Training and certification: Welders must be trained and certified according to ASME IX requirements to perform welding procedures.

In conclusion, designing a PWP and WPS according to ASME IX requires a comprehensive understanding of the code requirements, meticulous attention to detail, and adherence to established procedures. This ensures the safety, integrity, and reliability of the welding processes used in various industries.

answer 28 juillet 2024 13:05
26
dellisali
0 0 gold badges 0 silver badges 0 {% trans "bronze badges" }
comment Answer

Top viewed

How to calculate piping diameter and thikness according to ASME B31.3 Process Piping Design ?
What is Conductivity (fracture flow) used in Reservoir Engineering?
What is the scientific classification of an atom?
How to use Monte Carlo similation using python to similate Project Risks?
What is a neutron?

Tags Cloud

neutron electron proton atome three-phase electrical 220V Conductivity flow fracture reservoir Commitment Agreement planning Technical Guide scheduling bailer drilling Storage Quality Control QA/QC Regulatory Audit Compliance Drilling Completion logging Heading Well Offsite Fabrication Éthique Probabilité erreur intégrité Gestion actifs indexation Outil Zinc Sulfide/Sulfate Gas Oil Triple Project Planning Task Scheduling Force RWO PDP annulus Hydrophobic General Plan Testing Functional Test Density Mobilize Subcontract Penetration Digital Simulation tubular Processing goods Sponsor Network Path, Racking ("LSD") Start Medium Microorganisms Backward Engineering Reservoir V-door Water Brackish pumping Scheduled ("SSD") Safety Drill Valve Status Schedule Resource Level Chart Gantt Training Formaldehyde Awareness elevators Estimation Control Pre-Tender Estimate Current budget (QA/QC) Quality Assurance Inspection In-Process Concession (subsea) Plateau Impeller retriever Appraisal Activity (processing) Neutralization Source Potential Personal Rewards Ground Packing Element Liner Slotted Conformance Hanger Instrument Production (injector) Tracer Facilities (mud) Pressure Lift-Off Communication Nonverbal Carrier Concurrent Delays slick Valuation Leaders Manpower Industry Risks Management Incident Spending Investigation Limit Reporting test) (well Identification Phase Programme Vapor World Threshold Velocity lift) Particle Benefits Compressor Painting Insulation Float ("FF") Statistics element Temperature Detailed Motivating Policy Manual Emergency Requirements Response Specific ("KPI") Terms Performance Indicators Qualifications Contractor Optimistic Discontinuous Barite Clintoptolite Dispute Fines Migration Pitot Materials Procurement Evaluation Vendor Contract Award Assets Computer Modeling Procedures Configuration Verification Leader Phased clamp safety (facilities) Considerations Organization Development Competency Trade-off Tetrad Off-the-Shelf Items hazard consequence probability project Python Monte-Carlo risks simulation visualize analyze pipeline ferrites black-powder SRBC Baseline Risk tubing Diameter coiled Emulsifier Emulsion Invert Responsibility Casing Electrical Submersible Phasing Finish Known-Unknown Curvature (seismic) Pre-Qualifications Exchange Capacity Cation MIT-IA Depth Vertical Pulse Triplex Brainstorming Log-Inject-Log Managed GERT Nipple Cased Perforated Fault Software Staff System Vibroseis radioactivity Product Review Acceptance Capability Immature Net-Back Lapse Factor Specification Culture Matrix Staffing Effort Cement Micro Letter Fanning Equation factor) friction ECC WIMS Bar-Vent perforating meter displacement FLC Information Flow connection Junk Static service In-House OWC BATNA Curve Bridging depth control perforation Doghouse Scope Description D&A E&A Effect Belt Architecture wet DFIT Magnitude Order LPG Contractual Legal Electric Logging CL Drawing Logic Semi-Time-Scaled IAxOA CMIT Expenditures Actual opening Skirt access (corrosion) Passivation Blanking Performing Uplift Underbalance Communicating Groups SDV Fluid Shoot Qualification Spacing Hydrofluoric Shearing basket Construction Systems Programmer Individual Activation Layout organophosphates Deox Fourier A2/O botanical pesticide EAP colloidal Displacement process GPR Relationship SOC Constraint Prime Gathering Tap CM Subproject Oil-In-Place Percentage time-lag accumulator compounds aliphatic vapor evaporation compression echo فنى # psvs

Tags

-->-->
Back