Instructions: Choose the best answer for each question.
1. What is the primary purpose of cased hole logs?
a) To evaluate formation properties before casing installation.
Incorrect. Cased hole logs are used to analyze formation properties *after* casing installation.
b) To measure the thickness of the casing.
Incorrect. While caliper logs can measure wellbore diameter, they don't specifically focus on casing thickness.
c) To provide information about the wellbore and reservoir after casing is installed.
Correct. Cased hole logs are designed to provide insights into the wellbore and reservoir even after the well has been completed.
d) To determine the drilling fluid density.
Incorrect. Drilling fluid density is typically evaluated before casing installation.
2. Which type of cased hole log utilizes radioactive sources and detectors?
a) Chemical Logs
Incorrect. Chemical logs rely on chemical reactions and measurements.
b) Radioactive Logs
Correct. Radioactive logs use radioactive sources to measure properties like density, neutron porosity, and gamma ray.
c) Physical Logs
Incorrect. Physical logs utilize physical principles like caliper, temperature, and pressure measurements.
d) None of the above
Incorrect. Radioactive logs are a distinct category of cased hole logs.
3. What is the main purpose of a Cement Bond Log (CBL)?
a) Measuring the pressure profile in the wellbore.
Incorrect. Pressure profiles are measured by pressure logs.
b) Determining the quality of cement bonding between the casing and formation.
Correct. CBL is specifically designed to evaluate the cement bond quality.
c) Analyzing the flow of fluids in the wellbore.
Incorrect. Fluid flow analysis is done by production logs.
d) Identifying potential shale layers.
Incorrect. While gamma ray logs can detect shale layers, CBL focuses on cement bonding.
4. Which deployment method utilizes a smaller diameter cable suitable for memory logs?
a) Electric Line
Incorrect. Electric lines are used for traditional wireline logging.
b) Coiled Tubing
Incorrect. Coiled tubing is used for greater flexibility and reach.
c) Slick Line
Correct. Slick lines are designed for memory logs, recording data for later transmission.
d) Drill Pipe (LWD)
Incorrect. LWD technology measures data during drilling, not utilizing a cable.
5. What is a significant benefit of using cased hole logs?
a) They can only be used for new wells.
Incorrect. Cased hole logs are specifically designed for wells that have already been cased.
b) They allow for real-time analysis of production data.
Incorrect. While LWD provides real-time data, other cased hole log methods don't necessarily offer real-time analysis.
c) They provide valuable data for optimizing production and managing reservoir resources.
Correct. Cased hole logs provide critical information for optimizing production strategies and managing reservoirs effectively.
d) They are less expensive than conventional logging techniques.
Incorrect. Cased hole logging can be more complex and thus potentially more expensive.
Scenario: You are an oil and gas engineer working on an existing oil well that has been producing for several years. You notice a decline in production and want to understand the cause. You decide to run a cased hole log suite to analyze the wellbore and reservoir.
Task: Based on the following log data, identify potential reasons for the production decline and suggest possible solutions:
Your answer should include:
**Possible reasons for the production decline:** * **Casing failure:** The caliper log indicates an increase in wellbore diameter, potentially caused by casing failure in the specific zone. * **Poor cement bond:** The CBL shows a poor cement bond, which further suggests that the casing failure could be due to inadequate support. * **Fluid influx:** The unusually high temperature and the production log's indication of decreased fluid flow point to a potential fluid influx into the wellbore from a nearby formation. **Suggested solutions:** * **Wellbore repair:** To address the casing failure and poor cement bond, a wellbore repair operation is necessary. This could involve running a new liner or conducting cement squeeze operations to repair the damaged zone. * **Isolation and pressure control:** If the fluid influx is confirmed, it needs to be isolated. This might involve using packers or other isolation methods to separate the affected zone. * **Well stimulation:** After repair and isolation, it might be necessary to stimulate the well to restore its production potential. This could involve techniques like acidizing, fracturing, or other stimulation methods to improve reservoir access.
Cased hole logs are a vital tool in oil and gas exploration and production, enabling analysis of the wellbore and surrounding reservoir even after the well has been cased. These techniques utilize various measurement methods to collect data and provide valuable insights into the subsurface.
1.1 Radioactive Logs:
1.2 Chemical Logs:
1.3 Physical Logs:
1.4 Specialized Techniques:
1.5 Future Trends:
1.6 Conclusion:
Cased hole logging techniques offer a wide range of applications for assessing the wellbore, formation properties, and reservoir performance. By utilizing these techniques, oil and gas professionals can gain valuable insights into the subsurface, leading to improved production efficiency, well integrity, and ultimately, greater profitability.
Comments