All You Need About Piping
Datas, calculation tools, documentation, design guides ...
Piping Specification Table
- Specfication Number: TIJ-PIP-SPEC -3625
- According to ASME B16.5 Group: 2.8/1.1
General Informations
Service index
| Medium | Propreties | Ball Valve Include | CAS RN |
| Hydrocarbons | gas/condensate, wet | Y | Hydrocarbons |
| Chemical Formula |
EU Dangerous Substances Directive Danger Classification | |||||||||
| C | E | F/F+ | N | O | T/T+ | Xi | Xn | Garci Nogen | Muta Gen |
Service Caracteristics
| NP (Bar G) | Sour Service | Material |
| - - | sour | 6 Mo |
Service Temperature
| Min | Max |
| -50.0 | 340.0 |
| PWHT | Corrosion Allownace | Valve FETC |
| - - | 0 | A |
ASME Class
| Class | Class ref | DN min | DN max |
| #150 | 1 | 15.0 | 600.0 |
| #300 | - - | - - | - - |
| #600 | - - | - - | - - |
| #900 | - - | - - | - - |
| #1500 | - - | - - | - - |
| #2500 | - - | - - | - - |
Material Specifications
Pipe
| Seamless ASTM | ASTM | Seameless & Welded API | Welded ASTM | ASTM |
| A333-6 + clad UNS S31254 | - | - | A671-CC65 cl 22 + clad UNS S31254 | - |
Fittings
| Seamless ASTM | Seamless ASTM | Welded ASTM | Welded ASTM | ASTM |
| A403 WP-S UNS S31254 | A420-WPL6 + clad UNS S31254 | - | - | - |
Forging
| ASTM | ASTM | ASTM |
| A182-F44/F62 | A350-LF2 + clad UNS S31254 | - |
| Plate | Thermowell | Meterrun | Strainer (Y Type) |
| Seameless ASTM | ASTM | Seameless & Welded API | Welded ASTM |
| A240 UNS S31254 | A182-F44/F62 | 6Mo | UNS S31254 |
| Studbolts | Nuts |
| ASTM | ASTM or EN |
| A320-L7M | A320-L7M |
Gaskets
| <= DN 600 | Sealing | Welding Reinf. | Ineer Ring | Centering Ring |
| A194-7M | Spiral wound | Graphite | 6Mo | 6Mo |
| > DN 66 | Sealing | Welding Reinf. | Ineer Ring | Centering Ring |
| CS | - - | - - | - - | - - |
Clamp type connector
| Hub Blind hub ASTM | Clamp ASTM | Seal Ring |
| - - | - - | - - |
Valves
Valves | Check, Gate, Globe | ||
| Body & Bonnet ASTM forging | Trim | Body & Bonnet ASTM forging | Trim |
| A182-F44 | 6Mo | A351 CK3MCuN/CN-3NM | 6Mo |
Butterfly | Dual Plate Check | Ball (ISO 17292) | |
| Trim Class 150-600 | Trim 900 | Trim | Internal Set |
| 6Mo | - - | 6Mo | 6Mo |
{% trans "Ball" % (API 6D/ISO 14313) | Plug | |
| Internal Sest Calss 150-300 | Internal Sest Calss 600-2500 | Trim |
| 6Mo | 6Mo | 6Mo |
150# 300# 600# 900# 1500# 2500#
