All You Need About Piping
Datas, calculation tools, documentation, design guides ...
Piping Specification Table
- Specfication Number: TIJ-PIP-SPEC -1001
- According to ASME B16.5 Group: 1.1
General Informations
Service index
| Medium | Propreties | Ball Valve Include | CAS RN |
| Acetonitrile | - - | Y | Acetonitrile |
| Chemical Formula | C2H3N |
EU Dangerous Substances Directive Danger Classification | |||||||||
| C | E | F/F+ | N | O | T/T+ | Xi | Xn | Garci Nogen | Muta Gen |
| - - | - - | F | - - | - - | - - | - - | Xn | - - | - - |
Service Caracteristics
| NP (Bar G) | Sour Service | Material |
| - - | - - | Carbon steel |
Service Temperature
| Min | Max |
| 0.0 | 150.0 |
| PWHT | Corrosion Allownace | Valve FETC |
| - - | 1.0 | B |
ASME Class
| Class | Class ref | DN min | DN max |
| #150 | 1 | 15.0 | 1200.0 |
| #300 | 3 | 15.0 | 1200.0 |
| #600 | - - | - - | - - |
| #900 | - - | - - | - - |
| #1500 | - - | - - | - - |
| #2500 | - - | - - | - - |
Material Specifications
Pipe
| Seamless ASTM | ASTM | Seameless & Welded API | Welded ASTM | ASTM |
| A106-B | - | 5L-B | A672-C65 cl 22 | - - |
Fittings
| Seamless ASTM | Seamless ASTM | Welded ASTM | Welded ASTM | ASTM |
| A234-WPB | - | A234-WPBW | - | - - |
Forging
| ASTM | ASTM | ASTM |
| A105 | - | - |
| Plate | Thermowell | Meterrun | Strainer (Y Type) |
| Seameless ASTM | ASTM | Seameless & Welded API | Welded ASTM |
| A516-60/65/70 | AISI 316 | AISI 316 | AISI 316 |
| Studbolts | Nuts |
| ASTM | ASTM or EN |
| A193-B7 | A193-B7 |
Gaskets
| <= DN 600 | Sealing | Welding Reinf. | Ineer Ring | Centering Ring |
| A194-2H | Spiral wound | Graphite | AISI 316 | AISI 316 |
| > DN 66 | Sealing | Welding Reinf. | Ineer Ring | Centering Ring |
| CS | Metal grooved | Graphite | AISI 316 | AISI 316 |
Clamp type connector
| Hub Blind hub ASTM | Clamp ASTM | Seal Ring |
| - - | - - | - - |
Valves
Valves | Check, Gate, Globe | ||
| Body & Bonnet ASTM forging | Trim | Body & Bonnet ASTM forging | Trim |
| A105 | AISI 316, Stellite | A216-WCB/WCC | AISI 410 |
Butterfly | Dual Plate Check | Ball (ISO 17292) | |
| Trim Class 150-600 | Trim 900 | Trim | Internal Set |
| CS, Duplex, Stellite | - - | AISI 410 | AISI 316, PTFE |
{% trans "Ball" % (API 6D/ISO 14313) | Plug | |
| Internal Sest Calss 150-300 | Internal Sest Calss 600-2500 | Trim |
| AISI 316, PTFE | - - | - - |
150# 300# 600# 900# 1500# 2500#
