Multiple Completion

Test Your Knowledge

Multiple Completion Quiz

Instructions: Choose the best answer for each question.

1. What is the primary goal of implementing multiple completions in a wellbore?

a) To increase the overall hydrocarbon recovery. b) To reduce the risk of downhole problems. c) To simplify wellbore design and operation. d) To minimize the initial investment cost.

2. Which of the following is NOT a benefit of multiple completions?

a) Increased production. b) Enhanced reservoir management. c) Reduced drilling costs. d) Improved reservoir characterization. e) Reduced risk of downhole problems.

3. Which type of multiple completion allows for independent control of production from each zone?

a) Commingled completion b) Non-commingled completion c) Stacked completion d) Concentric completion

4. Which of the following is a type of non-commingled completion?

a) Stacked completion b) Side-by-Side completion c) Concentric completion d) Both b and c

5. What is the main challenge associated with multiple completions?

a) Lower production rates b) Difficulty in accessing multiple zones c) Increased complexity and potential risks d) Difficulty in isolating zones

Multiple Completion Exercise

Scenario: You are an engineer tasked with evaluating the feasibility of implementing a multiple completion strategy for a well targeting two separate oil-bearing zones separated by an impermeable shale layer. The top zone has high pressure and low viscosity oil, while the bottom zone has lower pressure and higher viscosity oil.

Task:

1. Identify the most suitable type of multiple completion for this scenario. Explain your reasoning, considering the differences in pressure and fluid characteristics of the two zones.
2. List two potential benefits and two potential challenges of implementing the chosen completion type.

Techniques

Chapter 1: Techniques of Multiple Completion

This chapter delves into the various techniques used for implementing multiple completions in oil and gas wells. These techniques are designed to isolate and control individual producing zones within a single wellbore, ensuring efficient and targeted production.

1.1 Non-Commingled Completions:

• Concentric Completions: This method employs multiple concentric strings of casing, each dedicated to isolating a separate producing zone. These zones are accessed through distinct tubing strings, allowing for independent control of production from each pay zone. This approach is particularly advantageous when dealing with zones having varying pressure regimes or fluid characteristics.

• Side-by-Side Completions: This technique utilizes individual perforations along the wellbore to access different producing zones, each equipped with its own tubing string and surface flowline for independent production and control. This configuration is commonly employed when zones are laterally offset and require isolation for optimized production.

1.2 Commingled Completions:

• Stacked Completions: In this method, multiple producing zones are accessed through perforations spaced along the wellbore and then combined into a single flow path. This allows for enhanced overall production rates by leveraging pressure differences between the zones. Stacked completions are particularly useful when zones exhibit similar fluid characteristics and are suitable for commingling.

1.3 Advanced Completion Techniques:

• Gravel Pack Completions: This technique involves packing gravel around the perforations to prevent sand production and maintain wellbore integrity. Gravel pack completions are particularly useful in formations with low permeability.

• Fractured Completions: This technique involves hydraulically fracturing the formation to enhance permeability and production. Fractured completions are often used in tight reservoirs to increase production rates.

• Artificial Lift Techniques: These techniques are employed to assist in lifting fluids from the wellbore to the surface, especially in low-pressure formations. Examples include gas lift, electric submersible pumps (ESPs), and progressive cavity pumps (PCPs).

1.4 Selection Criteria for Multiple Completion Techniques:

The selection of the appropriate multiple completion technique depends on various factors, including:

• Reservoir characteristics (pressure, permeability, fluid properties)
• Wellbore geometry (depth, diameter)
• Production objectives (production rate, well life)
• Cost considerations

1.5 Conclusion:

The diverse array of multiple completion techniques provides operators with a range of options for optimizing production from complex reservoirs. Each technique has its own advantages and disadvantages, and careful selection is crucial for achieving maximum production efficiency and sustainability.

Chapter 2: Models for Multiple Completion Design

This chapter explores the various models used for designing multiple completions, encompassing both geological and engineering aspects. These models provide valuable insights into reservoir behavior and assist in optimizing well performance.

2.1 Geological Models:

• Reservoir Simulation Models: These models simulate the flow of fluids within the reservoir, capturing complex interactions between multiple zones and providing insights into fluid movement, pressure distribution, and production potential.

• Geomechanical Models: These models analyze the mechanical properties of the reservoir rocks, considering stresses, strains, and fracture propagation. This helps in predicting wellbore stability and optimizing completion design to minimize risks of wellbore instability and zonal communication.

2.2 Engineering Models:

• Production Forecasting Models: These models predict the future production performance of the well based on reservoir properties, completion design, and production strategies. They are crucial for evaluating the economic feasibility of multiple completions.

• Wellbore Flow Models: These models simulate the flow of fluids within the wellbore, considering factors such as pressure drop, flow rate, and fluid properties. This helps in optimizing tubing and surface flowline design for efficient production from multiple zones.

• Downhole Equipment Selection Models: These models assist in selecting appropriate downhole equipment, such as packers, valves, and tubing strings, for efficient isolation and control of multiple zones within the wellbore.

2.3 Integrated Modeling Approaches:

Combining geological and engineering models allows for a comprehensive understanding of the reservoir system and optimizes multiple completion design for maximizing production and minimizing risks. This integrated approach incorporates data from various sources, such as seismic surveys, well logs, and production history, to create a realistic representation of the reservoir and its complexities.

2.4 Conclusion:

The use of sophisticated models plays a vital role in designing and implementing multiple completions. By simulating reservoir behavior and optimizing well performance, these models contribute significantly to the success and efficiency of this production enhancement technique.

Chapter 3: Software for Multiple Completion Design and Analysis

This chapter delves into the software tools available for designing, simulating, and analyzing multiple completions. These software solutions streamline the process, enhance accuracy, and provide valuable insights for optimizing production.

3.1 Reservoir Simulation Software:

• Eclipse: A widely used reservoir simulation software developed by Schlumberger. It provides comprehensive capabilities for modeling complex reservoir systems, including multiple completions.

• CMG: Computer Modelling Group's software suite offers various tools for reservoir simulation, including GEM, STARS, and IMEX. These tools support detailed modeling of multiple completions and their impact on production.

• Petrel: A geological modeling software from Schlumberger that integrates seamlessly with Eclipse for comprehensive reservoir characterization and simulation, including multiple completion scenarios.

3.2 Wellbore Design and Analysis Software:

• PIPESIM: A comprehensive wellbore simulation software from Schlumberger, used for analyzing wellbore flow, pressure drop, and equipment performance. PIPESIM supports detailed modeling of multiple completions and their impact on production.

• WellCAD: A software suite from Roxar, providing tools for wellbore design, simulation, and analysis, including capabilities for modeling multiple completions and their impact on production.

• Open-source Software: Various open-source software packages are also available for simulating wellbore flow and analyzing well performance, providing cost-effective alternatives to commercial software.

3.3 Data Management and Visualization Software:

• Petrel: Offers powerful data management and visualization capabilities for integrating geological and engineering data, including production data from multiple zones.

• Spotfire: A data visualization software from TIBCO, used for analyzing production data and identifying trends related to multiple completions, facilitating optimization strategies.

3.4 Cloud-based Software:

• Azure: Microsoft's cloud platform provides access to computing resources for running complex simulations and managing large datasets related to multiple completion projects.

• AWS: Amazon Web Services offer similar capabilities for cloud-based data storage, computation, and analysis, supporting large-scale multiple completion projects.

3.5 Conclusion:

Software tools play a crucial role in optimizing the design, simulation, and analysis of multiple completions. From comprehensive reservoir simulation to detailed wellbore analysis, these software solutions enhance accuracy, streamline processes, and provide valuable insights for achieving maximum production efficiency and sustainability.

Chapter 4: Best Practices for Multiple Completion Implementation

This chapter outlines best practices for implementing multiple completions, ensuring successful and sustainable production from complex reservoirs. These practices address crucial aspects of design, execution, and monitoring, minimizing risks and maximizing efficiency.

4.1 Thorough Reservoir Characterization:

• Conduct comprehensive geological and geophysical studies to accurately identify and define multiple producing zones within the reservoir.

• Utilize well logs, seismic data, and core analysis to obtain a detailed understanding of reservoir properties, including pressure, permeability, and fluid characteristics.

4.2 Optimizing Completion Design:

• Select appropriate completion techniques based on reservoir characteristics, wellbore geometry, and production objectives.

• Utilize modeling software to simulate fluid flow, pressure distribution, and production performance, optimizing well design for maximum production efficiency.

• Choose robust and reliable downhole equipment, including packers, valves, and tubing strings, to ensure isolation and control of multiple zones.

4.3 Rigorous Execution and Monitoring:

• Employ experienced personnel and utilize specialized equipment for safe and efficient implementation of multiple completions.

• Implement rigorous quality control measures during all stages of well construction and completion.

• Establish a comprehensive monitoring system to track production performance, pressure changes, and fluid characteristics from each zone.

4.4 Data Analysis and Optimization:

• Regularly analyze production data to identify potential issues and optimize production strategies for each zone.

• Utilize data visualization software to identify trends and insights from production data, informing decision-making for future optimization efforts.

• Continuously evaluate and refine completion strategies to maximize production potential and ensure sustainable well performance.

4.5 Risk Mitigation:

• Implement robust wellbore stability measures to prevent wellbore collapse and zonal communication.

• Utilize advanced completion techniques, such as gravel pack completions and fractured completions, to minimize risks of sand production and improve production from low-permeability formations.

• Implement appropriate artificial lift techniques to overcome low-pressure challenges and ensure efficient fluid recovery from multiple zones.

4.6 Conclusion:

Adhering to best practices for multiple completion implementation is essential for maximizing production efficiency, minimizing risks, and ensuring sustainable well performance. This includes thorough reservoir characterization, optimized completion design, rigorous execution and monitoring, data analysis and optimization, and risk mitigation strategies.

Chapter 5: Case Studies of Multiple Completions

This chapter showcases successful case studies of multiple completion implementations, highlighting the effectiveness of this technique in enhancing production from complex reservoirs. These examples demonstrate the benefits and challenges associated with multiple completions, providing valuable insights for future projects.

5.1 Case Study 1: Enhanced Production in a Shale Gas Reservoir:

• A multiple completion project in a shale gas reservoir resulted in a significant increase in production rate compared to conventional single-zone completions.

• The project involved utilizing multiple stacked completions to access and produce from multiple zones within the shale formation, maximizing production from a single wellbore.

• The use of hydraulic fracturing in conjunction with stacked completions further enhanced production by increasing permeability and allowing for efficient fluid flow from multiple zones.

5.2 Case Study 2: Optimizing Production in a Heterogeneous Oil Reservoir:

• A multiple completion project in a heterogeneous oil reservoir with varying reservoir properties effectively enhanced production by isolating zones with different fluid characteristics.

• The project involved utilizing concentric completions to isolate and control production from multiple zones with different pressure regimes and fluid compositions.

• The use of separate tubing strings and surface flowlines allowed for independent control of production from each zone, optimizing production and ensuring efficient recovery from different reservoir intervals.

5.3 Case Study 3: Rejuvenating Production in a Mature Oil Field:

• A multiple completion project in a mature oil field successfully revived production from wells that had declined significantly.

• The project involved accessing previously untapped zones within the reservoir using multiple side-by-side completions.

• This approach allowed for the exploitation of additional hydrocarbon reserves, extending the life of the well and increasing overall production from the field.

5.4 Case Study 4: Challenges and Lessons Learned:

• A multiple completion project encountered challenges related to zonal communication and wellbore instability, highlighting the importance of rigorous wellbore stability measures and advanced completion techniques.

• The project provided valuable lessons regarding the importance of thorough reservoir characterization, proper equipment selection, and careful execution to mitigate risks associated with multiple completions.

5.5 Conclusion:

These case studies demonstrate the effectiveness of multiple completions in enhancing production from complex reservoirs. However, they also highlight the importance of careful planning, rigorous execution, and continuous monitoring to ensure successful and sustainable production. Through careful consideration of reservoir characteristics, completion design, and risk mitigation strategies, operators can leverage multiple completions to maximize production from complex oil and gas fields.