في عالم إنتاج النفط والغاز المعقد، فإن فهم خصائص البئر أمر بالغ الأهمية لتحسين أدائه. أحد العوامل المهمة هو **الجلد**، وهو مقياس لمقاومة تدفق السوائل بالقرب من فوهة البئر. يمكن أن تساعد تحديد قيمة الجلد بدقة المهندسين على اتخاذ قرارات مستنيرة بشأن علاجات تحفيز البئر، وتصميم الإكمال، واستراتيجيات الإنتاج بشكل عام.
**التدفق بعد التدفق (FAF)** هي أداة قوية تُستخدم لتحقيق هذا الهدف. وتتضمن إجراء **اختبار تدفق متعدد النقاط**، حيث يُنتج البئر بمعدلات تدفق مختلفة، ويتم تسجيل انخفاض الضغط عند كل معدل. من خلال تحليل البيانات، يمكننا تحديد **قيمة الجلد** عند كل معدل تدفق.
**كيف يعمل FAF:**
**أهمية الجلد الميكانيكي:**
يمثل الجلد الميكانيكي المقاومة المتأصلة للتدفق الناجمة عن عوامل مثل:
**فوائد FAF:**
**قيود FAF:**
**في الختام، FAF هي تقنية قيمة لتحديد قيم الجلد بدقة في آبار النفط والغاز. من خلال فهم الجلد الحقيقي، يمكن للمشغلين اتخاذ قرارات مستنيرة بشأن تحفيز البئر، وتصميم الإكمال، وتحسين الإنتاج، مما يؤدي في النهاية إلى تحسين أداء البئر وزيادة استخلاص الهيدروكربونات. **
Instructions: Choose the best answer for each question.
1. What is the primary purpose of conducting a Flow-After-Flow (FAF) test?
a) To measure the volume of oil produced from a well. b) To determine the skin value of a well at various flow rates. c) To analyze the chemical composition of the produced fluids. d) To assess the integrity of the wellbore casing.
The correct answer is **b) To determine the skin value of a well at various flow rates.**
2. How many flow rates are typically used in a Flow-After-Flow (FAF) test?
a) One b) Two c) Three or more d) The number depends on the well's depth.
The correct answer is **c) Three or more.**
3. What does the "mechanical skin" of a well represent?
a) The resistance to flow caused by the viscosity of the oil. b) The inherent resistance to flow near the wellbore. c) The total amount of water produced along with the oil. d) The pressure difference between the reservoir and the wellbore.
The correct answer is **b) The inherent resistance to flow near the wellbore.**
4. What is a major benefit of using the Flow-After-Flow (FAF) technique?
a) It is a very fast and efficient method for determining skin. b) It eliminates the need for other well stimulation techniques. c) It provides a comprehensive understanding of the well's characteristics. d) It guarantees a significant increase in oil production.
The correct answer is **c) It provides a comprehensive understanding of the well's characteristics.**
5. What is a potential limitation of the Flow-After-Flow (FAF) technique?
a) It is not applicable to wells with high flow rates. b) It requires specialized equipment that is expensive. c) It can be time-consuming to conduct. d) It does not account for changes in reservoir pressure.
The correct answer is **c) It can be time-consuming to conduct.**
Scenario: A well was tested using the Flow-After-Flow (FAF) method. The following data was collected:
| Flow Rate (bbl/day) | Wellhead Pressure (psi) | |---|---| | 0 | 3000 | | 100 | 2950 | | 200 | 2900 | | 300 | 2850 | | 400 | 2800 |
Task:
The plot should show a slightly curved line with a negative slope. The best-fit line should intersect the y-axis at approximately 3000 psi. Therefore, the mechanical skin of the well is estimated to be 0.
Comments